Wedding files: DIY satin belt


My wedding dress fit well off the rack, except it really needed some waist definition.


So I bought a spool of 2″ wide polyester satin ribbon from Jo-Ann Fabrics and tied it into a sash.


It pulled in the waist really well! But the trailing ends didn’t quite mesh with this style of dress, or at least my personal taste. It needed something more polished and tailored. So I decided to turn the sash into a belt.


Want to make a satin belt of your own? I didn’t take photos of the process, but if you have basic hand-sewing skills and remember to try on the belt periodically throughout the process, you’ll hopefully find my notes easy enough to follow.

You’ll need:

  • A length of satin ribbon (your waist size plus several inches)
  • A length of medium or heavy weight fusible interfacing
  • A hook and bar, or a few hooks and eyes
  • Thread that matches the ribbon
  • A hand-sewing needle
  • An iron with a steam setting
  • A press cloth (scrap fabric to keep interfacing goo off your iron)

Here’s how:

  1. Choose your length:
    • Hold the ribbon snug around your waist where the belt should sit.
    • Place a pin to mark the point where the end overlaps.
    • Add 4″ past the pin and then trim the ribbon.
  2. Strengthen your belt:
    • Make a mark or place a pin 2″ from one end, and 1″ from the other.
    • Cut a piece of interfacing the length you have marked (you are leaving the ends un-interfaced), and slightly narrower than the ribbon width.
    • Apply the interfacing to the back side of the ribbon between your marks, following the package directions.
  3. Attach the hook:
    • Fold the shorter end in half so that the raw edge meets the interfacing.
    • Fold over again so the raw edge is enclosed.
    • Sew around all four sides of the folded part with a running stitch.
    • Place the hook on the front of the belt toward the very edge, with the hook part pointing toward the rest of the belt.
    • Attach the hook by stitching through all three layers. The stitches on the back will be against your dress, so they won’t be visible.
  4. Attach the bar:
    • Fold the longer end in half so that the raw edge meets the interfacing, and pin in place.
    • Place the bar at the center of the folded part, on the front side of the ribbon.
    • Attach the bar by stitching through both layers of ribbon. The interfaced part is not involved yet.
    • Fold the ribbon over again so the raw edge is enclosed and your stitches are hidden.
    • Sew around all four sides of the folded part with a running stitch.
  5. Try on your new belt!

Final thoughts and tips:

  • Consider adding more length to the bar end, and sewing on two bars an inch apart. This will allow you to loosen the belt after dinner! I actually planned to do this, but mistakenly didn’t account for enough ribbon to cover the hook. You can see in the top photo that my bar had to be attached at least a half inch from the end so the hook didn’t peek out.
  • When you’re ready to wear it, consider basting (attaching with temporary stitches) the belt to your dress at a few key points. The interfacing made my belt a bit grippy on the back, but it still shifted upward quite a bit as I wore it, and I had to keep tugging it into place.
  • If you’d like to cover the overlapping part, consider adding a bow. Tilly and the Buttons has a great bow belt tutorial. You can wear the bow either in front or in back.


It’s a done deal — Dan and I were married last Friday!


Our parents and siblings came out for a long weekend. It actually poured rain most of the days due to a rare storm system — boo. Still, we had tons of fun together and there were enough clear patches for us to go to the zoo and the ocean, play giant jenga and cornhole, and introduce them to our friends over s’mores and games.


On the wedding day my dad made my bouquet from grocery store flowers, and even though my hair appointment ran super late due to a traffic jam, we all made it to the courthouse (barely) on time.


A mumbly judge led us through the world’s fastest civil ceremony. Afterward, I kept saying “I can’t believe we’re already married! That was so quick!!”


The rain let up for a few professional portraits…


And then we were off to a delicious dinner at a La Jolla restaurant.


Dan surprised me by carrying me across the threshold when we got home — he’s secretly a romantic, aww.


We aren’t honeymooning right away, as we’re saving time off for a bigger family celebration in June in Ohio, and then hopefully an international trip within the next year. So it was back to work on Monday… and my firm kicked off our website redesign project on Tuesday! No rest for the newlywed.

Next I’ll be sharing a few wedding planning posts (though there wasn’t much to plan!) and also stay tuned for professional photos in a few weeks!