In our last home, my sewing machine sat in the bedroom on an Ikea Expedit desk like this:
It was great to have so much storage right at hand. Unfortunately the new house has no good place for such a large piece, so I decided to search Craigslist for a desk that would fit the spare wall in our new bedroom.
My sewing machine is my grandma’s 1958 Singer Slant-O-Matic 401A. Grandma used it on a card table with a custom-sized hole where the machine’s base nested, making a seamless work surface where it met the table. See how the bottom is kind of unfinished, as though it’s meant to be concealed?
Grandma’s sewing table is across the country in my parents’ basement, though, so at first I assumed I’d just get a regular desk. But one of the first Craigslist results was an “awesome mid century sewing table that has been converted to a desk.” I emailed the seller to ask if the sewing machine hole was still operable. She said yes! I traced the base of my machine onto paper and brought the template with me to the seller’s house. (Bringing the whole thing would’ve been a hassle — it’s made of at least 25 lbs of solid metal.)
It was perfect. I brought it straight home. The drawers were full of old straight pins and lint, and the finish was a bit murky… but after some determined scrubbing with diluted apple cider vinegar, it’s clean and fresh.
Turns out this table was originally made for a 1950s Singer, and the hole fits my machine exactly.
There are two hinges on the back of the hole. They’re intended to fasten to the base of the machine, so that you can pivot it toward you into the table to conceal it with an extra piece of wood when you’re not sewing (so cool!!).
[Incidentally, this photo was taken before the rest, and before I’d scrubbed it with vinegar. See the dull finish on top and the white marring on the right leg and drawer front? All better now!]
The hinge pegs fit into the holes on my machine, but I haven’t yet figured out how to secure them so they don’t slip out when you tilt the machine. Here’s a photo I found of how it’s supposed to work.
If anyone reading this happens to know how to make the hinges work, please leave a comment! I will probably have to buy hardware like one of these, which seem to be easily available on ebay.
But in the meantime, I’m more than happy to leave the machine on display.
Next quest: a chair that complements the desk, preferably without arms so it can tuck under the desk.